Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt mass flow rate | 337°C/6.6kg | ASTMD1238 | 9.0 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus 2 | | ASTMD638 | 6890 | Mpa |
| Tensile strength 3 | 断裂 | ASTMD638 | 140 | Mpa |
| Bending modulus 4 | 100mmSpan | ASTMD790 | 6890 | Mpa |
| Elongation rate 4 | 断裂 | ASTMD638 | 4.0 | % |
| Flexural Strength4 | Break,100mmSpan | ASTMD790 | 228 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 210 | °C |
| Hot deformation temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 211 | °C |
| Vicat softening temperature | | ASTMD15255 | 226 | °C |
| RTIElec | | UL746 | 170 | °C |
| Evolution Calendar intelligent importer | | UL746 | 170 | °C |
| RTIStr | | UL746 | 170 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Compared to the anti leakage trace index | CTI | UL746 | PLC4 | |
| Arc resistance 6 | | ASTMD495 | PLC6 | |
| Hot wire ignition | HWI | UL746 | PLC1 | |
| High arc combustion index | HAI | UL746 | PLC4 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC2 | |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| ReverseNotchIzodImpact | 3.20mm | ASTMD256 | 480 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | M级 | ASTMD785 | 114 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Extreme Oxygen Index | | ASTMD2863 | 50 | % |
| UL flame retardant rating | 0.41mm | UL94 | V-0 | |
| UL flame retardant rating | 1.9mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices