Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | 2.00mm | 内部方法 | 0.50to0.70 | % |
| Water absorption rate | 23°C,24hr | ISO62 | 0.10 | % |
| Outdoor applicability | Black | UL746C | f2 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Bending stress | 23°C | ISO178 | 98.0 | Mpa |
| Nominal tensile fracture strain | 23°C | ISO527-2 | 13 | % |
| Tensile stress | 屈服,23°C | ISO527-2 | 60.0 | Mpa |
| Bending modulus | 23°C | ISO178 | 2430 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 120 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 114 | °C |
| Linear coefficient of thermal expansion | MD：-30到65°C | ISO11359-2 | 7E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength 5 | 2.00mm | IEC60243-1 | 29 | KV/mm |
| Surface resistivity | | IEC60093 | 1E+16 | ohms |
| Dielectric constant | 100Hz | IEC60250 | 2.90 | |
| Dielectric constant | 1MHz | IEC60250 | 2.90 | |
| Volume resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Dissipation factor | 100Hz | IEC60250 | 3E-03 | |
| Dissipation factor | 1MHz | IEC60250 | 4E-03 | |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of simply supported beam gap 3 | 23°C | ISO179 | 15 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| FlameRating | 0.73mm | UL94 | V-1 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices