Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | g/10min | ISO 1133 | 77 |
| Water absorption rate | | % | ISO 62 | 2.1 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy notch impact strength | | J/cm | ISO 179 | 0.7 |
| Tensile modulus | | Gpa | ISO 527 | 2.7 |
| Yield tensile strength | | MPa | ISO 527 | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | -，0.46Mpa | ℃ | ISO 75 | 218 |
| Hot deformation temperature | -，1.8Mpa | ℃ | ISO 75 | 195 |
| Flame retardancy | 1.47mm | | UL94 | V-0 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | kV/mm | IEC 60243-1 | |
| Surface resistivity | | Ohm | IEC 60093 | |
| Dielectric constant | | | IEC 60250 | 3.8 |
| Volume resistivity | | Ohm.cm | IEC 60093 | |
| Processing performance | Test Condition | Test Method | Test Result | Unit |
|---|
| vicat softening point | | ℃ | ISO 306 | 215 |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Oxygen index | | % | ISO 4589-1/-2 | 38 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices