Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile yield strength quality index | | GB/T 1040 | ≥23 | Mpa |
| Tensile yield strength test results | | GB/T 1040 | 27.6 | Mpa |
| Quality index of elongation at break | | GB/T 1040 | ≥600 | % |
| Test results of elongation at break | | GB/T 1040 | 804 | % |
| Quality index of impact strength for simply supported beams | | GB/T 1043 | ≥25 | kJ/m² |
| Test results of impact strength of simply supported beams | | GB/T 1043 | 26.7 | kJ/m² |
| Biochemical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Cleanliness | 色粒)质量指标 | SH/T 1541 | ≤20 | 粒/kg |
| Cleanliness | 色粒)检测结果 | SH/T 1541 | 0 | 粒/kg |
| Cleanliness | 杂质)质量指标 | SH/T 1541 | ≤60 | 粒/kg |
| Cleanliness | 杂质)检测结果 | SH/T 1541 | 0 | 粒/kg |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volatile matter quality index | | GB/T 15658 1 | ≤350 | mg/kg |
| Volatile matter test results | | GB/T 15658 1 | 未检出 | mg/kg |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Density quality index | | GB/T 1033 | 0.948±0.002 | g/cm³ |
| Density detection results | | GB/T 1033 | 0.948 | g/cm4 |
| Quality index of melt flow rate | 190℃/5.0kg | GB/T 3682 | 0.23±0.03 | g/10min |
| Test results of melt flow rate | | GB/T 3682 | 0.25 | g/10min |
| Quality index of melt flow rate（ | 190℃/21.6kg | GB/T 3682 | 6.2±1.5 | g/10min |
| Test results of melt flow rate | | GB/T 3682 | 6.4 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices