Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.25 | |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage rate | Flow | ASTM D-955 | 0.35 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile yield elongation | | ASTM D-638 | 2.5 | % |
| Tensile yield strength | | ASTM D-638 | 115 | Mpa |
| elongation | | ASTM D638/ISO 527 | 2.5 | % |
| Rockwell hardness | | ASTM D785 | 70 | |
| Rockwell hardness | | ASTM D-785 | 70 | M-scale |
| Bending modulus | | ASTM D-790 | 7500 | Mpa |
| bending strength | | ASTM D-790 | 185 | Mpa |
| bending strength | | ASTM D790/ISO 178 | 26800 psi | kg/cm²(MPa)[Lb/in²] |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Combustibility (rate) | | UL94 | HB | |
| Hot deformation temperature | 0.45MPa，未退火 | ASTM D-648 | 268 | °C |
| Hot deformation temperature | 1.80MPa，未退火 | ASTM D-648 | 245 | °C |
| Flame retardancy | | UL 94 | HB | |
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000025 | cm/cm/℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric constant | 1E+6Hz | ASTM D-150 | 2.900 | |
| Volume resistivity | | ASTM D-257 | 1E+16 | ohm.cm |
| Volume resistivity | | ASTM D257/IEC 60093 | 1.0E+16 | Ω.cm |
| Dielectric loss factor | 1E+6Hz | ASTM D-150 | 0.0010 | |
| Electrical strength | | ASTM D-149 | 48.0 | KV/mm |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.050 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices