Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Density/specific gravity | | ASTMD792 | 1.05 | g/cm³ |
| Melt mass flow rate | 200°C/5.0kg | ASTMD1238 | 4.5 | g/10min |
| Melt mass flow rate | 230°C/3.8kg | ASTMD1238 | 12 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Bending strength 4 | 3.18mm | ASTMD790 | 47.1 | Mpa |
| Tensile strength 3 | 3.18mm | ASTMD638 | 28.4 | Mpa |
| Bending modulus 4 | 3.18mm | ASTMD790 | 2060 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火,12.7mm | ASTMD648 | 102 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTMD256 | 98 | J/m |
| Impact strength of cantilever beam gap | 6.35mm | ASTMD256 | 83 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | L计秤 | ASTMD785 | 58 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.6mm | UL94 | HB | |
| UL flame retardant rating | 3.2mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices