Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 1.5 | g/10min |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 8.0 | g/10min |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Light transmittance | 1/8" | ASTM D-1003 | 91 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural elasticity | 1/4"，2.8mm/min | ASTM D-790 | 33000 | kg/cm3 |
| surface hardness | | ASTM D-785 | M-85 | |
| Elongation rate | 1/8"，6mm/min | ASTM D-638 | 8 | % |
| Tensile strength | 1/8"，6mm/min | ASTM D-638 | 700 | kg/cm2 |
| elongation at break | | ASTM D638/ISO 527 | 5 | % |
| tensile strength | | ASTM D638/ISO 527 | 690 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ASTM D790/ISO 178 | 32000 | kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 1000 | kg/cm²(MPa)[Lb/in²] |
| bending strength | 1/4"，2.8mm/min | ASTM D-790 | 1050 | kg/cm2 |
| IZOD impact strength | 1/4"，23℃ | ASTM D-256 | 1.7 | kg.cm/cm |
| IZOD notch impact strength | | ASTM D256/ISO 179 | 1.8 | kg·cm/cm(J/M)ft·lb/in |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Combustibility (rate) | | UL94 | 1/16'HB | |
| Hot deformation temperature | | ASTM D648/ISO 75 | 89 | ℃（℉） |
| Hot deformation temperature | 1/4"，120℃/hr | ASTM D-648 | 89 | °C |
| vicat softening point | 1/8"，50℃/hr | ASTM D-1525 | 105 | °C |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 200℃，5Kg | ASTM D-1238 | 1.5 | g/10min |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| turbidity | 1/8" | ASTM D-1003 | 0.4 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices