Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile fracture stress (TD) | 500mm | ISO 527-3 | 18 | Mpa |
| Tensile yield stress (MD) | 500mm | ISO 527-3 | 8 | Mpa |
| Tensile yield stress (TD) | 500mm | ISO 527-3 | 7 | Mpa |
| Tensile fracture strain (TD) | 500mm | ISO 527-3 | 600 | % |
| Tensile fracture strain (MD) | 500mm | ISO 527-3 | 200 | % |
| Falling hammer impact | | ISO 7765/1A | 300 | g |
| Elmendorf tear strength | MD | ISO 6383/2 | 1 | N |
| Elmendorf tear strength | TD | ISO 6383/2 | 1 | N |
| Tensile fracture stress (MD) | 500mm | ISO 527-3 | 24 | Mpa |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | | ASTM D-2457 | 60 | |
| Haze | | ASTM D-1003 | 16 | % |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt flow rate | 190℃/2.16kg | ASTM D-1238 | 1.1 | g/10min |
| density | | ASTM D-792 | 926 | g/cm³ |
| BA content | | 杜邦方法 | 7 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices