Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 0.902 | |
| Molding shrinkage rate | | ASTM D955 | 1.4 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 1.4 | % |
| Melt mass flow rate | 230°C/2.16kg | ASTMD1238 | 3.0 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服 | ASTMD638 | 35.3 | Mpa |
| elongation | 屈服 | ASTMD638 | 10 | % |
| Rockwell hardness | | ASTM D785 | 97 | |
| Bending modulus | | ASTM D790/ISO 178 | 16400 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ASTMD790 | 1630 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | | ASTMD648 | 98 | °C |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 97 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices