Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.12 | |
| Molding shrinkage rate | | ASTM D955 | 0.5-0.6 | % |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 16 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ASTM D412/ISO 527 | 2600MPA | g/cm² |
| Rockwell hardness | | ASTM D785 | 115 | |
| Charpy impact strength | | ASTM D256/ISO 179 | 60 | kg·cm/cm(J/M)ft·lb/in |
| Charpy impact strength | | ASTM D256/ISO 179 | 26 | kg·cm/cm(J/M)ft·lb/in |
| Processing performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dry conditions | | | 2.0到4.0HR，80度 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices