Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage | flow | ASTM D-955 | 2-4 | in/inE-3 |
| Mold shrinkage | xflow | ASTM D-955 | 2-4 | in/inE-3 |
| Density/specific gravity | | ASTM D-792 | 1.51 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Izod reverse gap impact value | 73℉ | ASTM D-256 | 7.5 | ft-lb/in |
| Izod Gap Impact Value | 73℉ | ASTM D-256 | 1.6 | ft-lb/in |
| Tensile modulus | | ASTM D-638 | 1260000 | psi |
| Flexural strength | | ASTM D-790 | 33000 | psi |
| Flexural modulus | | ASTM D-790 | 1300000 | psi |
| Fracture tensile elongation | | ASTM D-638 | 2.0 | % |
| Tensile strength at break | | ASTM D-638 | 24500 | psi |
| Yield tensile strength | | ASTM D-638 | 24500 | psi |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Heat index | 电性能 | UL 746B | 180 | deg℃ |
| Heat index | 机械冲击性能 | UL 746B | 170 | deg℃ |
| Heat index | 非机械冲击性能 | UL 746B | 180 | deg℃ |
| Unquenched heat deformation temperature | 66PSi | ASTM D-648 | 410 | deg℉ |
| Coefficient of thermal expansion | flow，0℉-300℉ | ASTM E-831 | 0 | in/in℉ |
| Coefficient of thermal expansion | xflow，0℉-300℉ | ASTM E-831 | 2×10 | in/in℉ |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 337℃，6.6kgf | ASTM D-1238 | 7.1 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices