Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Apparent density | | ASTMD4894 | 0.36 | g/cm³ |
| Shrinkage rate | MD | 内部方法 | 4.4 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服,1.50mm | ASTMD4894 | 40.0 | Mpa |
| compressive strength | 0%应变2 | ASTMD695 | 8.70 | Mpa |
| compressive strength | 1%应变3 | ASTMD695 | 5.90 | Mpa |
| compressive strength | 25%应变3 | ASTMD695 | 28.6 | Mpa |
| Load deformation | 200°C,6.9MPa | ASTMD621 | 14.9 | % |
| Load deformation | 25°C,14MPa | ASTMD621 | 10.6 | % |
| Load deformation | 100°C,14MPa | ASTMD621 | 21.7 | % |
| elongation | 断裂,1.50mm | ASTMD4894 | 500 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | DSC | 324 | °C |
| Continuous use temperature | | | 260 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | | 140 | KV/mm |
| Surface resistivity | | ASTMD257 | >1.0E+15 | ohms |
| Dielectric constant | 1kHz | ASTMD150 | <2.10 | |
| Volume resistivity | | ASTMD257 | >1.0E+18 | ohms·cm |
| Dissipation factor | 1kHz | ASTMD150 | <1.0E-4 | |
| elastomer | Test Condition | Test Method | Test Result | Unit |
|---|
| Permanent compression deformation | 25°C4 | ASTMD621 | 3.0 | % |
| Permanent compression deformation | 100°C4 | ASTMD621 | 7.4 | % |
| Permanent compression deformation | 200°C5 | ASTMD621 | 4.1 | % |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| MITFlexuralLife | | ASTMD2178 | 3E+06 | |
| StretchingVoidIndex | | ASTMD4895 | 62.0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices