Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | | | 0.06 | % |
| Mold shrinkage rate | | | 3-5 | E-3 |
| enhance | | | 30 | % |
| Density/specific gravity | | | 1.54 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength (bending point) | | | 103 | Mpa |
| Tensile strength (fracture point) | | | 107 | Mpa |
| Hard expansion Rockwell R | | | 119 | |
| Bending modulus | | | 6890 | Mpa |
| Impact strength gap | 23℃ | | 80 | J/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | | | 221 | °C |
| Hot deformation temperature | | | 193 | °C |
| Coefficient of linear expansion | | | 2.5E-05 | 1/℃ |
| Long term use temperature | 电气 | | 120 | °C |
| Long term use temperature | 含冲击 | | - | °C |
| Long term use temperature | 无冲击 | | 120 | °C |
| Flame retardancy | | | 1.6 | mm |
| Flame retardancy | | | HB | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistance | | | 4E+16 | ohm-cm |
| Loss factor | | | 0.02 | |
| Dielectric constant | | | 3.5 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices