Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage rate | 3.2mm | ASTM D-955 | - | E-3 |
| Density/specific gravity | | ASTM D-792 | - | |
| Water absorption rate | | ASTM D-570 | - | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength gap | 23℃ | ASTM D-256 | 535 | J/m |
| tensile strength | 屈伏点 | ASTM D-638 | 67 | Mpa |
| Bending modulus | | ASTM D-790 | 2691 | Mpa |
| bending strength | | ASTM D-790 | 103 | Mpa |
| Stretching rate | 断裂点 | ASTM D-638 | 50 | % |
| Tensile modulus | | ASTM D-638 | - | Mpa |
| Rockwell hardness | | ASTM D-785 | - | R |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame retardancy | | UL-94 | 1.5 | |
| Hot deformation temperature | 1.8Mpa | ASTM D-648 | 86 | °C |
| UL long-term use temperature | 无冲击 | UL-746B | 75 | °C |
| vicat softening point | | ASTM D-525 | - | °C |
| Hot deformation temperature | 0.45Mpa | ASTM D-648 | - | °C |
| Flame retardancy | | UL-94 | V-0 | |
| Coefficient of linear expansion | | E831 | - | 1/℃ |
| UL long-term use temperature | 含冲击 | UL-746B | 65 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistance | | ASTM D-257 | - | ohm-cm |
| Loss factor | 1MHz | ASTM D-150 | - | |
| Volume resistance | | ASTM D-257 | - | ohm-cm |
| Dielectric constant | 1MHz | ASTM D-150 | - | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices