PPA AMODEL® AS-1133 HS NT SOLVAY USA

330

Properties:
High temperature resistan
High rigidity
Low temperature resistanc
Filler: Glass fiber reinf
33% filler by weight
Usages:
Thin walled products
Electrical components
Home appliance components
Automotive Applications
Lawn and garden equipment
Power/Other Tools
Valves/valve components
Industrial components
Industrial applications
Thick wall accessories (c
Machine/mechanical compon
Metal substitution
Engine parts
Parts under the hood of a
Vehicle electronics
Application in the automo
Fuel pipeline
Oil/Gas Supplies
currency
Shell
Certificates:
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	MD	ASTMD955	0.40	%
Shrinkage rate	Shrinkage rate	TD	ASTMD955	0.80	%
Water absorption rate	24hr	ASTMD570	0.21	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile stress	屈服	ISO527-2	225	Mpa
Tensile strain	断裂	ISO527-2	3.0	%
Tensile modulus		ASTMD638	13100	Mpa
Tensile modulus	Tensile modulus		ISO527-2	12200	Mpa
elongation	断裂	ASTMD638	2.5	%
Bending modulus		ASTMD790	10300	Mpa
Bending modulus	Bending modulus		ISO178	10300	Mpa
bending strength	屈服	ASTMD790	317	Mpa
Bending stress		ISO178	326	Mpa
compressive strength		ASTMD695	276	Mpa
shear strength		ASTMD732	101	Mpa
Poisson's ratio		7.58	0.41
Tensile strength	断裂	ASTMD638	221	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Peak melting temperature		ASTMD3418	310	°C
Continuous use temperature	--2	ASTMD3045	164	°C
Continuous use temperature	Continuous use temperature	--3	ASTMD3045	185	°C
Hot deformation temperature	0.45MPa,退火,3.18mm	ASTMD648	297	°C
	Hot deformation temperature	1.8MPa,退火,3.18mm	ASTMD648	285	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,退火	ISO75-2/Af	277	°C
Linear coefficient of thermal expansion	MD：0to100°C	ASTME831	2.3E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：160to249°C	ASTME831	1.4E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD：0to100°C	ASTME831	5.9E-05	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：160to249°C	ASTME831	1.3E-04	cm/cm/°C
Melting temperature		ISO11357-3	310	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric constant	60Hz	ASTMD150	4.40
Dielectric constant	Dielectric constant	1MHz	ASTMD150	4.20
Arc resistance		ASTMD495	140	sec
Volume resistivity		ASTMD257	1E+16	ohms·cm
Dielectric strength	3.17mm	ASTMD149	21	KV/mm
Dissipation factor	60Hz	ASTMD150	5E-03
Dissipation factor	Dissipation factor	1MHz	ASTMD150	0.017
Compared to the anti leakage trace index	CTI	UL746	550	V

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch		ISO179/1eU	82	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	R级	ASTMD785	125

optical performance	Test Condition	Test Method	Test Result	Unit
Transmittance 5	1070nm:1.60mm	ASTMD1003	>35	%
Transmittance 5	Transmittance 5	940nm:1.60mm	ASTMD1003	>30	%

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating 4	3.2mm	UL94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PPA AMODEL® AS-1133 HS NT SOLVAY USA

Technical Data Sheet

You May Like