Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | MPa | ISO 527-2/1A/1 | 3200 |
| Tensile fracture strain | | % | ISO 527-2/1A/5 | 1.7 |
| Tensile fracture stress | | MPa | ISO 527-2/1A/5 | 46 |
| Charpy notch impact strength | 23℃ | KJ/m | ISO 179/1eA | 1.6 |
| Charpy notch free impact strength | 23℃ | KJ/m | ISO 179/1eU | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa，Unannealed | ℃ | ISO 75-2/B | 127 |
| Glass transition temperature | | ℃ | ISO 11357-1 | 134 |
| Glass transition temperature | | ℃ | ISO 11357-2 | 134 |
| Glass transition temperature | | ℃ | ISO 11357-3 | 134 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric constant | 1000Hz | | IEC 60250 | 2.35 |
| Volume resistivity | | ohm·cm | IEC 60093 | >1E+14 |
| Compared to the leakage trace index | | V | IEC 60112 | ＞600 |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| transmission | | % | ISO 13468-2 | 91.4 |
| Refractive index | | | ISO 489 | 1.533 |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | cm | ISO 1133 | 48 |
| Density/specific gravity | | g/cm | ISO 1183 | 1.02 |
| Water absorption rate | Saturation，23℃ | % | ISO 62 | 0.01 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices