Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 23℃，24hr | ISO 62 | 0.12 | % |
| Density/specific gravity | | ISO 1183 | 1.63 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy impact strength | 缺口 | ISO 179（leA） | 9 | kJ/m² |
| tensile strength | | ISO 527 | 125 | Mpa |
| elongation | 断裂 | ISO 527 | 2.6 | % |
| Bending modulus | | ISO 178 | 9.45*103 | Mpa |
| bending strength | | ISO 178 | 205 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.82MPa | ISO 75f | 205 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | IEC 60243 | 31 | KV/m |
| Volume resistance | | IEC 60093 | 1*1014 | Ω。m |
| Leakage Trace Index | | IEC 60112 | 250 | V |
| Dielectric loss tangent | 106HZ | IEC 60250 | 1.7*10-2 | |
| Betweenness constant | 106HZ | IEC 60250 | 3.4 | |
| Arc resistance | | IEC 61621 | 60 | sec |
| ash content | | | 30 | % |
| Processing capability | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | | ISO 294-4 | 0.4-0.8 | % |
| Spiral length | | | 33 | CM |
| Flame retardant performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame retardancy | | UL94 | V-0（0.8mm） | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices