Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 1.4 | % |
| Melt mass flow rate | 230°C/2.16kg | ASTMD1238 | 2.0 | g/10min |
| Density/specific gravity | | ASTMD792 | 0.896 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 屈服 | ASTMD638 | 7.0 | % |
| Bending modulus | | ASTMD790 | 1320 | Mpa |
| Tensile strength | 屈服 | ASTMD638 | 26.5 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | | ASTMD648 | 92 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | -18°C | ASTMD256 | 1200 | J/m |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 180 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 83 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| DropWeightImpactStrength | -29°C | 内部方法 | 31.2 | J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices