Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.16 | |
| Molding shrinkage rate | | ASTM D955 | 0.3-0.7 | % |
| Water absorption rate 23 ℃/24h | | ASTM D570/ISO 62 | 0.3 | % |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 6 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation at break | | ASTM D638/ISO 527 | 40 | % |
| Tensile modulus | | ASTM D638/ISO 527 | 40 | kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D638/ISO 527 | 52 | kg/cm²(MPa)[Lb/in²] |
| elongation | | ASTM D638/ISO 527 | 40 | % |
| Rockwell hardness | | ASTM D785 | 68 | |
| Bending modulus | | ASTM D790/ISO 178 | 1.9 | kg/cm²(MPa)[Lb/in²] |
| Tensile elongation at break (elongation at break) | | ASTM D638/ISO 527 | 40 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Combustibility (rate) | | UL94 | HB | |
| Linear expansion coefficient | | ASTM D696/ISO 11359 | 6*105 | mm/mm.℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | ASTM D257/IEC 60093 | 10的16次方 | Ω |
| Dielectric constant | | ASTM D150/IEC 60250 | 3.7 | |
| Volume resistivity | | ASTM D257/IEC 60093 | 10的13次方 | Ω.cm |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Light transmittance | | ASTM D1003/ISO 13468 | 92 | % |
| Refractive index | | ASTM D542/ISO 489 | 1.49 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices