Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.50 | % |
| Shrinkage rate | TD | ASTMD955 | 0.60 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.20 | % |
| Density/specific gravity | | ISO1183/A | 1.60 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ISO527-2 | 9100 | Mpa |
| Bending modulus | | ISO178 | 7790 | Mpa |
| Tensile strength | | ASTMD638 | 102 | Mpa |
| Bending stress | | ISO178 | 171 | Mpa |
| Tensile strain | 断裂 | ISO527-2 | 1.3 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear coefficient of thermal expansion | MD：50到100°C | ASTME831 | 3.1E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：100到150°C | ASTME831 | 3.8E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：150to200°C | ASTME831 | 2.7E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：200to250°C | ASTME831 | 3.1E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：50到100°C | ASTME831 | 6.3E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：100到150°C | ASTME831 | 1E-04 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：150to200°C | ASTME831 | 1.3E-04 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD：200to250°C | ASTME831 | 1.5E-04 | cm/cm/°C |
| Melting temperature | | ISO11357-3 | 324 | °C |
| Hot deformation temperature | 0.45MPa,未退火 | ISO75-2/B | 306 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 2.9 | kJ/m² |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| OpticalReflectivity | --2 | ASTME1331 | >90 | % |
| OpticalReflectivity | --3 | ASTME1331 | >90 | % |
| OpticalReflectivity | --4 | ASTME1331 | >90 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices