Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt mass flow rate | 297°C/5.0kg | ASTMD3159 | 25 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | | ASTMD638 | 49.0 | Mpa |
| elongation | 断裂 | ASTMD638 | 420 | % |
| Bending modulus | | ASTMD790 | 790 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | DSC | 240 | °C |
| film | Test Condition | Test Method | Test Result | Unit |
|---|
| Penetration 2 | 60°C | 内部方法 | 2.6 | g·mm/m²/atm/24hr |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | 23°C | ASTMD256 | 无断裂 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices