Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile yield stress quality index (qualified) | 50mm/min±5mm/min | GB/T 1040-1992 | ≥24 | Mpa |
| Tensile yield stress test results | | GB/T 1040-1992 | 24.9 | Mpa |
| Quality index of elongation at break (qualified) | 50mm/min±5mm/min | GB/T 1040-1992 | ≥600 | % |
| Test results of elongation at break | | GB/T 1040-1992 | 760 | % |
| Biochemical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Cleanliness | 合格 | SH/T 1541-2006 | ≤5 | 粒/kg |
| Cleanliness | 色粒)检测结果 | SH/T 1541-2006 | ≤5 | 粒/kg |
| Cleanliness | 合格 | SH/T 1541-2006 | ≤20 | 粒/kg |
| Cleanliness | 杂质)检测结果 | SH/T 1541-2006 | ≤20 | 粒/kg |
| Quality index of ash content in granular materials | 合格 | GB 9345-1988 | ≤0.03 | % |
| Particle ash content inspection results | | GB 9345-1988 | 0.03 | % |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Density quality index | 合格 | GB/T 1033-1986 | 0.9500-0.9540 | g/cm³ |
| Density detection results | | GB/T 1033-1986 | 0.9533 | g/cm4 |
| Melt flow rate quality index (qualified) | 190℃/2.16kg | GB 3682-2000 | 1.9-2.5 | g/10min |
| Test results of melt flow rate | | GB 3682-2000 | 2.2 | g/11min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare