Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24小时 | % | ASTM D570 | |
| Melt index | 2.16kg@380℃ | g/10min | ASTM D1238 | |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile fracture elongation rate | 23℃ | % | ASTM D638 | |
| IZOD notch impact strength | | J/m | ASTM D256 | |
| Tensile modulus | 23℃ | MPa | ASTM D638 | |
| tensile strength | 23℃ | MPa | ASTM D638 | |
| Bending modulus | 23℃ | MPa | ASTM D790 | 2900 |
| bending strength | 23℃ | MPa | ASTM D790 | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.82MPa | ℃ | ASTM D648 | 195 |
| Flame retardancy | 1.60mm | 级 | UL94 | V0 |
| Coefficient of expansion | | cm/cm/℃ | ASTM D696 | 0.000058 |
| Maximum continuous operating temperature | | ℃ | ASTM D794 | 180 |
| Oxygen indication value | | % | ASTM D2863 | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Relative track index | | | ASTM D3638 | 150 |
| Insulation strength | 3.2mm | kV/mm | ASTM D149 | |
| Insulation strength | | kV/mm | ASTM D149 | |
| Volume resistance | 60 Hz | Ω·cm | ASTM D257 | |
| Dielectric loss factor | 23℃ | | ASTM D150 | |
| Surface resistivity | | ohms | ASTM D257 | |
| Dielectric constant | | | ASTM D150 | 3.20 |
| Arc resistance | | sec | ASTM D495 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices