Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM-D792 | 1.04 | g/cm |
| Mold shrinkage rate | | ASTM-D955 | 0.4-0.7 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| tensile strength | | ASTM-D638 | 50 | Mpa |
| Bending modulus | | ASTM-D790 | 2200 | Mpa |
| Impact strength of cantilever beam gap | 3.2mm,Notched | ASTM-D256 | 300 | J/m |
| tensile elongation | | ASTM-D638 | 45 | % |
| bending strength | | ASTM-D790 | 60 | Mpa |
| Rockwell hardness | | ASTM-D785 | 102 | R-Scale |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.82Mpa | ASTM-D648 | 87 | ℃ |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | 60° | ASTM-D523 | 88 | ° |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 220℃/10kg | ASTM-D1238 | 12 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices