Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 190℃,2.16kg | ASTM D-1238 | 7 | g/10min |
| Shrinkage rate | 流动 | ASTM D-955 | 0.5-0.7 | % |
| Density/specific gravity | | ASTM D-792 | 1.2 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 断裂 | ASTM D-638 | >100 | % |
| Bending modulus | | ASTM D-790 | 341000 | psi |
| bending strength | 屈服 | ASTM D-790 | 13100 | psi |
| Tensile strength | 屈服 | ASTM D-638 | 8960 | psi |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 16 | ft·lb/in |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa, 未退火 | ASTM D-648 | 291 | °F |
| Hot deformation temperature | 维卡软化点 | ASTM D-1525 | 271 | °F |
| Hot deformation temperature | 热变形温度，1.8MPa, 未退火 | ASTM D-648 | 307 | °F |
| Hot deformation temperature | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 透射率 | ASTM D-1003 | 89 | % |
| Hot deformation temperature | 雾度 | ASTM D-1003 | <0.8 | % |
| optical performance | 折射率 | ASTM D-542 | 1.585 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices