Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD：23°C | 内部方法 | 1.5到2.0 | % |
| Melt mass flow rate | 230°C/2.16kg | ASTMD1238 | 38 | g/10min |
| Density/specific gravity | | ASTMD792 | 0.900 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服,23°C | ASTMD638 | 28.4 | Mpa |
| elongation | 断裂,23°C | ASTMD638 | >200 | % |
| Bending modulus | 23°C | ASTMD790A | 1080 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火,6.35mm | ASTMD648 | 95.0 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | 23°C,3.18mm | ASTMD256 | 49 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级,23°C | ASTMD785 | 90 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices