Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD,3.18mm | ASTMD995 | 0.20 | % |
| Shrinkage rate | TD,3.20mm | ASTMD995 | 0.40 | % |
| Density/specific gravity | | ASTMD792 | 1.94 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Suspended wall beam without notch impact strength | 23°C | ASTMD256 | 320 | J/m |
| Suspended wall beam without notch impact strength | 抗压强度 | ASTMD695 | 295 | Mpa |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 75 | J/m |
| elongation at break | 23°C | ASTMD638 | 1.1 | % |
| elongation at break | 泊松比 | ASTME132 | 0.34 | |
| tensile strength | 23°C | ASTMD638 | 159 | Mpa |
| Bending modulus | 23°C | ASTMD790 | 19300 | Mpa |
| bending strength | 23°C | ASTMD790 | 241 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.80MPa未退火 | ASTMD648 | 265 | °C |
| Hot deformation temperature | 最高使用温度 | | 220-240 | °C |
| Hot deformation temperature | 导热系数 | ASTMC177 | 0.510 | W/m/K |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric constant | | ASTMD150 | 4.7 | 1kHz |
| Dielectric constant | | ASTMD150 | 4.6 | 1MHz |
| Dissipation factor | | ASTMD150 | 2E-03 | |
| Dissipation factor | | ASTMD150 | 3E-03 | |
| Dissipation factor | 耐电弧性 | ASTMD495 | 180 | S |
| Dissipation factor | 相对漏电起痕指数 | ASTMD3638 | 225 | V |
| Insulation strength | | ASTMD149 | 10 | KV/mm |
| Volume resistance | | ASTMD257 | 1E+15 | Ω.cm |
| Surface resistance | | ASTMD257 | 1E+16 | Ω.cm |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | | ASTMD785 | 101 | M（Scale） |
| Rockwell hardness | | ASTMD785 | 119 | R |
| Flame retardant performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Fire rating | | UL-94 | 0.71mm | V-0 |
| Fire rating | | UL-94 | 1.50mm | V-0,5VA |
| Fire rating | | UL-94 | 3.00mm | V-0 |
| Fire rating | | UL-94 | 6.00mm | V-0 |
| Fire rating | 氧指数 | ASTM2863 | 65 | % |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear expansion coefficient | | | 1E-03 | cm/cm/°C |
| Linear expansion coefficient | | | 1.5E-03 | cm/cm/°C |
| Linear expansion coefficient | | ASTME831 | 3E-03 | cm/cm/°C |
| Linear expansion coefficient | | ASTME831 | 7E-03 | cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices