PPO NORYL™ N225X SABIC INNOVATIVE US
299
- Properties:ProcessabilityChlorine resistanceBromine freeFlame retardantNon brominatedImproved processability aNon chlorinatedFlame retardantNon brominatedImproved processability aNon chlorinatedFlame retardant
- Usages:medical care
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density, Solid | ASTM D-792 | 1.11 | ||
| Mold shrinkage, flow, 0.125" | ASTM D-955 | 5-7 | in/in E-3 | |
| Mold shrinkage, xflow, 0.125" | ASTM D-955 | 5-7 | in/in E-3 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Instrument control anti impact energy @ peak value- 22F. | ASTM D-3763 | 8.6 | ft-lbs | |
| Izod impact value, reverse gap- 22F | ASTM D-256 | 12.0 | ft-lb/in | |
| Flexural strength, yield, 0.250 | ASTM D-790 | 14400 | psi | |
| Izod impact value, gap- 22F | ASTM D-256 | 1.8 | ft-lb/in | |
| Tensile elongation, yield, type I 0.125“ | ASTM D-638 | 8.0 | % | |
| Izod impact value, reverse gap, 73F | ASTM D 256 | 16.6 | ft-lb/in | |
| Instrument control anti impact energy @ peak value, 73F. | ASTM D-3763 | 29.0 | ft-lbs | |
| Tensile strength, fracture, type I, 0.125“ | ASTM D 638 | 7200 | psi | |
| Izod impact value, gap, 73F | ASTM D-256 | 3.5 | ft-lb/in | |
| Stretching elongation, fracture, type I 0.125“ | ASTM D-638 | 17.0 | % | |
| Tensile strength, yield, type I, 0.125“ | ASTM D-638 | 9700 | psi | |
| Flexural modulus, 0.250“ | ASTM D-790 | 361500 | psi |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| HDT (Heat Distortion Temperature), 264 psi, 0.250 ", unannealed | ASTM D-648 | 211 | deg F | |
| UL file number, United States | E121562 | |||
| Thermal index, non mechanical impact performance | UL 746B | 95 | deg C | |
| Thermal index, mechanical impact performance | UL 746B | 80 | deg C | |
| HDT (Heat Distortion Temperature), 66 psi, 0.250 ", unannealed | ASTM D-648 | 229 | deg F | |
| V-0 rated value | 测试厚度 | UL 94 | 0.060 | inch |
| Vicat softening temperature, Grade B | ASTM D-1525 | 264 | deg F | |
| 5VA rated value | 测试厚度 | UL 94 | 0.120 | inch |
| Thermal index, electrical performance | UL 746B | 95 | deg C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | ASTM D-257 | >1 E14 | ohm/sq | |
| Volume resistivity | ASTM D-257 | 2E+16 | ohm-cm | |
| Loss factor, 50 Hz | ASTM D-150 | 0.0100 | ||
| Dielectric constant, 50 Hz | ASTM D-150 | 2.69 | ||
| Loss factor, 1 MHz | ASTM D-150 | 0.0070 | ||
| Dielectric constant, 1 MHz | ASTM D-150 | 2.55 | ||
| Dielectric strength, in oil, 125 mils | ASTM D-149 | 414 | v/mil |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
