Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | TD | ISO294-4 | 1.0 | % |
| Shrinkage rate | MD | ISO294-4 | 0.30 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress | 断裂 | ISO527-2 | 150 | Mpa |
| Tensile strain | 断裂 | ISO527-2 | 2.2 | % |
| Tensile modulus | | ISO527-2 | 10000 | Mpa |
| Bending modulus | | ISO178 | 8700 | Mpa |
| Bending stress | | ISO178 | 230 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 283 | °C |
| Melting temperature 2 | | ISO11357-3 | 310 | °C |
| RTIElec | 0.40mm | UL746 | 140 | °C |
| RTIElec | 0.75mm | UL746 | 140 | °C |
| RTIElec | 1.5mm | UL746 | 140 | °C |
| RTIElec | 3.0mm | UL746 | 140 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dissipation factor | 100Hz | IEC60250 | 7E-03 | |
| Dissipation factor | 1MHz | IEC60250 | 0.013 | |
| Relative permittivity | 100Hz | IEC60250 | 4.30 | |
| Relative permittivity | 1MHz | IEC60250 | 4.00 | |
| Leakage Trace Index | | IEC60112 | 600 | V |
| Volume resistivity | | IEC60093 | >1.0E+15 | ohms·cm |
| Dielectric strength | | IEC60243-1 | 33 | KV/mm |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.75mm | UL94 | V-0 | |
| UL flame retardant rating | 1.5mm | UL94 | V-0 | |
| UL flame retardant rating | 0.75mm | IEC60695-11-10,-20 | V-0 | |
| UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | V-0 | |
| Extreme Oxygen Index | | ISO4589-2 | 37 | % |
| Hot filament ignition temperature | 0.40mm | IEC60695-2-13 | 700 | °C |
| Hot filament ignition temperature | 0.75mm | IEC60695-2-13 | 725 | °C |
| Hot filament ignition temperature | 3.0mm | IEC60695-2-13 | 775 | °C |
| FMVSS flammability | | FMVSS302 | DNI | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| Odor | | VDA270 | 3.50 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices