Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage rate | 3.2mm | ASTM D-955 | 5-7 | |
| Density/specific gravity | | ASTM D-792 | 1.06 | |
| Flame retardancy | | UL94 | HB | |
| Flame retardancy | | UL94 | 1.5 | mm |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Gap impact strength | 23°C | ASTM D-256 | 213 | J/m |
| Gap impact strength | -40°C | ASTM D-256 | 133 | J/m |
| tensile strength | 屈伏点，3.2mm | ASTM D-638 | 59 | Mpa |
| tensile strength | 断裂点，3.2mm | ASTM D-638 | 30 | Mpa |
| Rockwell hardness | | ASTM D-785 | 119 | |
| Bending modulus | 6.4mm | ASTM D-790 | 2418 | Mpa |
| bending strength | 6.4mm | ASTM D-790 | 90 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa | ASTM D-648 | 126 | °C |
| Coefficient of linear expansion | | ASTM E-831 | 7.2×10 | 1/°C |
| UL long-term use temperature | 电气 | UL 746B | 105 | °C |
| UL long-term use temperature | 含冲击 | UL 746B | 90 | °C |
| UL long-term use temperature | 无冲击 | UL 746B | 105 | °C |
| Hot deformation strength | 0.45MPa | ASTM D-648 | 137 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Loss factor | 60Hz | ASTM D-150 | 0.0004 | |
| Dielectric constant | 60Hz | ASTM D-150 | 2.65 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24hrs | ASTM D-570 | 0.06 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices