Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt flow rate | 240℃/5.0kg | ASTM D-1238 | 18 | g/10min |
| Shrinkage rate | MD,3.2mm | 内部方法 | 0.3-0.5 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级,23℃ | ASTM D-785 | 117 | |
| Tensile strength | 23℃ | ASTM D-638 | 62.8 | Mpa |
| Bending modulus | 23℃ | ASTM D-790 | 4020 | Mpa |
| bending strength | 23℃ | ASTM D-790 | 111 | Mpa |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 59 | J/m |
| Cantilever beam without notch impact strength | 23℃,3.18mm | ASTM D-256 | 1200 | J/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火,6.35mm | ASTM D-648 | 92 | °C |
| UL flame retardant rating | 1.2mm | UL 94 | V-0 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices