Technical Data Sheet
| Thin film | Test Condition | Test Method | Test Result | Unit |
|---|
| Penetration Penetration 2 | 60℃ 60℃ 2 | 内部方法 | 2.6 | g·mm/m²/atm/24 hr |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | 23℃ 23℃ | ASTM D256 | 无断裂 | |
| Physical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Specific Gravity Density | | ASTM D792 | 1.78 | g/cm³ |
| Melt mass flow rate | 297℃，5.0kg 297℃/5.0 kg | ASTM D3159 | 25 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | | ASTM D638 | 49 | Mpa |
| Tensile strain | 断裂 断裂 | ASTM D638 | 420 | % |
| Flexural Modulus | | ASTM D790 | 790 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | DSC | 240 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices