PPS Ryton® R-4-200BL CPCHEM USA

344

Properties:
Flame retardant
Glass fiber reinforced
high strength
High temperature resistan
Filler: Glass fiber reinf
40% filler by weight
Usages:
packing
Electrical applications
household electrical appl
Fitness equipment
Application in the automo
Automotive Applications
Charger casing
Certificates:
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	MD：3.20mm		0.20	%
Shrinkage rate	Shrinkage rate	TD：3.20mm		0.50	%
Water absorption rate	23°C,24hr	ASTMD570	0.020	%
Density/specific gravity		ASTMD792	1.68	g/cm³

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile strength		ASTMD638	179	Mpa
Bending stress		ISO178	260	Mpa
compressive strength		ASTMD695	275	Mpa
Poisson's ratio		ISO527	0.40
Tensile stress		ISO527-2	185	Mpa
Tensile strain	断裂	ISO527-2	1.5	%
elongation	断裂	ASTMD638	1.5	%
Bending modulus		ASTMD790	14500	Mpa
Bending modulus	Bending modulus		ISO178	14000	Mpa
bending strength		ASTMD790	255	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	1.8MPa,未退火	ASTMD648	265	°C
Linear coefficient of thermal expansion	MD：-50到50°C	ASTME831	1.5E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：100到200°C	ASTME831	1E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD：-50到50°C	ASTME831	4E-05	cm/cm/°C
			Linear coefficient of thermal expansion	TD：100到200°C	ASTME831	8.5E-05	cm/cm/°C
			Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：导热系数	ASTME831	0.33	W/m/K
UL temperature rating		UL746B	200to220	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
InsulationResistance2	90°C		1E+11	ohms
Compared to the anti leakage trace index	CTI	UL746	150	V
Dielectric strength		ASTMD149	22	KV/mm
Dissipation factor	25°C,1kHz	ASTMD150	2E-03
Dissipation factor	Dissipation factor	25°C,1MHz	ASTMD150	2E-03
Surface resistivity		ASTMD257	1E+16	ohms
Dielectric constant	25°C,1kHz	ASTMD150	3.90
Dielectric constant	Dielectric constant	25°C,1MHz	ASTMD150	3.80
Arc resistance		ASTMD495	125	sec
Volume resistivity		ASTMD257	1E+16	ohms·cm

Impact performance	Test Condition	Test Method	Test Result	Unit
Unscented Izod impact strength		ISO180	35	kJ/m²
Cantilever beam without notch impact strength	3.18mm	ASTMD4812	530	J/m
Impact strength of cantilever beam gap	3.17mm	ASTMD256	80	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/A	8.0	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	M计秤	ASTMD785	100
Rockwell hardness	Rockwell hardness	R计秤	ASTMD785	120

flammability	Test Condition	Test Method	Test Result	Unit
FlameRating	1.6mm	UL94	V-05VA
Extreme Oxygen Index		ASTMD2863	57	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PPS Ryton® R-4-200BL CPCHEM USA

Technical Data Sheet

You May Like