Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | TD：--4 | 内部方法 | 0.80to1.1 | % |
| Shrinkage rate | MD：--2 | 内部方法 | 0.40to0.60 | % |
| Shrinkage rate | MD：--3 | 内部方法 | 0.60to0.90 | % |
| Shrinkage rate | TD：--2 | 内部方法 | 0.50to0.80 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.070 | % |
| Specific volume | | ASTMD792 | 0.712 | cm³/g |
| Density/specific gravity | | ASTMD792 | 1.41 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strain 5 | Break | ASTMD638 | 5.0 | % |
| Bending modulus 7 | 50.0mm跨距 | ASTMD790 | 4830 | Mpa |
| FlexuralStrength6 | Break,50.0mmSpan | ASTMD790 | 145 | Mpa |
| Tensile strength 5 | Break | ASTMD638 | 93.1 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 191 | °C |
| Hot deformation temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 210 | °C |
| RTIElec | | UL746 | 130 | °C |
| Evolution Calendar intelligent importer | | UL746 | 130 | °C |
| RTIStr | | UL746 | 140 | °C |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 2.2E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | MD：60to138°C | ASTME831 | 2.2E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | 1.60mm,在油中 | ASTMD149 | 23 | KV/mm |
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 20 | KV/mm |
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| Arc resistance 7 | | ASTMD495 | PLC5 | |
| Dissipation factor | 100Hz | ASTMD150 | 2E-03 | |
| Dissipation factor | 1MHz | ASTMD150 | 0.020 | |
| Dielectric constant | 1MHz | ASTMD150 | 3.40 | |
| Dielectric constant | 100Hz | ASTMD150 | 3.60 | |
| Volume resistivity | | ASTMD257 | 3.3E+16 | ohms·cm |
| High voltage arc tracing rate | HVTR | UL746 | PLC1 | |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 53 | J/m |
| Impact strength of cantilever beam gap | 23°C | ASTMD4812 | 530 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 118 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.70mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices