Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 0.918 | |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 2.0 | g/10min |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | 60℃ | ASTM D-2457 | 60 | |
| turbidity | | ASTM D-1003 | 15 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation at break | MD | ASTM D-882 | 700 | % |
| elongation at break | TD | ASTM D-882 | 750 | % |
| Anti puncture strength | | SABIC | 63 | J/mm |
| Falling hammer impact | | ASTM D-1709 | 110 | g |
| 1% secant modulus | MD，1% | ASTM D-882 | 220 | Mpa |
| 1% secant modulus | TD，1% | ASTM D-882 | 260 | Mpa |
| Men's tear strength | MD | ASTM D-1922 | 135 | g |
| Men's tear strength | TD | ASTM D-1922 | 400 | g |
| Tensile strength at break | MD | ASTM D-882 | 35 | Mpa |
| Tensile strength at break | TD | ASTM D-882 | 59 | Mpa |
| Yield tensile strength | MD | ASTM D-882 | 12 | Mpa |
| Yield tensile strength | TD | ASTM D-882 | 10 | Mpa |
| elongation at break | | ASTM D638/ISO 527 | 750 | % |
| tensile strength | | ASTM D638/ISO 527 | 59 | kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 10 | kg/cm²(MPa)[Lb/in²] |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | ASTM D-1238 | 2.0 | g/10min |
| density | | ASTM D-792 | 0.918 | g/cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices