Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.2 | |
| Water absorption rate 23 ℃/24h | | ASTM D570/ISO 62 | 0.3 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ASTM D638/ISO 527 | 2400 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ASTM D790/ISO 178 | 66 | kg/cm²(MPa)[Lb/in²] |
| IZOD notch impact strength | | ASTM D256/ISO 179 | 80P（C） | kg·cm/cm(J/M)ft·lb/in |
| Charpy impact strength | | ASTM D256/ISO 179 | N | kg·cm/cm(J/M)ft·lb/in |
| Tensile elongation at break (elongation at break) | | ASTM D638/ISO 527 | >50 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | | ASTM D648/ISO 75 | 124 | ℃（℉） |
| Hot deformation temperature | | ASTM D648/ISO 75 | 137 | ℃（℉） |
| vicat softening point | | ASTM D1525/ISO R306 | 144 | ℃（℉） |
| Linear expansion coefficient | | ASTM D696/ISO 11359 | 0.65 | mm/mm.℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric loss | | ASTM D150/IEC 60250 | 5 | |
| Dielectric loss | | ASTM D150/IEC 60250 | 90 | |
| Surface resistivity | | ASTM D257/IEC 60093 | 1E16 | Ω |
| Dielectric constant | | ASTM D150/IEC 60250 | 3.1 | |
| Dielectric constant | | ASTM D150/IEC 60250 | 3.0 | |
| Arc resistance | | ASTM D495/IEC 60112 | 275 | |
| Volume resistivity | | ASTM D257/IEC 60093 | 1E14 | Ω.cm |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Light transmittance | | ASTM D1003/ISO 13468 | 89 | % |
| Refractive index | | ASTM D542/ISO 489 | 1.586 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices