Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Haze | | | 优级｜≤75 | % |
| Haze | | | 一级｜- | % |
| Haze | | | 合格｜- | % |
| Tensile fracture nominal strain | | IEC60093 | 652 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 断裂 | | 400 | % |
| tensile strength | | | 30 | Mpa |
| Tensile fracture strength | | | 优级｜≥22 | Mpa |
| Tensile fracture strength | | | 一级｜≥20 | Mpa |
| Tensile fracture strength | | | 合格｜≥18 | Mpa |
| elongation | 断裂 | | 优级｜≥450 | % |
| elongation | 断裂 | | 一级｜≥450 | % |
| elongation | 断裂 | | 合格｜≥450 | % |
| Dart impact damage quality | | | 优级｜≤80 | g |
| Dart impact damage quality | | | 一级｜- | g |
| Dart impact damage quality | | | 合格｜- | g |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Particle appearance | 蛇皮和丝发 | | 优级｜≤20 | 个/kg |
| Particle appearance | 蛇皮和丝发 | | 一级｜≤20 | 个/kg |
| Particle appearance | 蛇皮和丝发 | | 合格｜≤40 | 个/kg |
| Particle appearance | 大粒和小粒 | | 优级｜≤10 | g/kg |
| Particle appearance | 大粒和小粒 | | 一级｜≤10 | g/kg |
| Particle appearance | 大粒和小粒 | | 合格｜≤10 | g/kg |
| Particle appearance | 污染粒子 | | 优级｜≤10 | 个/kg |
| Particle appearance | 污染粒子 | | 一级｜≤20 | 个/kg |
| Particle appearance | 污染粒子 | | 合格｜≤40 | 个/kg |
| fisheye | 0.4mm | | 优级｜≤15 | 个/1520cm2 |
| fisheye | 0.4mm | | 一级｜≤25 | 个/1520cm2 |
| fisheye | 0.4mm | | 合格｜≤40 | 个/1520cm2 |
| fisheye | 0.8mm | | 优级｜≤2 | 个/1520cm2 |
| fisheye | 0.8mm | | 一级｜≤4 | 个/1520cm2 |
| fisheye | 0.8mm | | 合格｜≤8 | 个/1520cm2 |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | | 0.948 | kg/m |
| Melt index | 21.6kg | | 9 | g/10min |
| Melt flow rate | | | 优级｜0.4±0.02 | g/10min |
| Melt flow rate | | | 一级｜0.4±0.02 | g/10min |
| Melt flow rate | | | 合格｜0.4±0.04 | g/10min |
| density | | | 优级｜0.948±0.002 | g/cm³ |
| density | | | 一级｜0.948±0.003 | g/cm³ |
| density | | | 合格｜0.948±0.004 | g/cm³ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices