Technical Data Sheet
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | 23℃，3.2mm 23℃，3.18 mm | ASTM D256 | 44 | J/m |
| Physical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt mass flow rate | 230℃，2.16kg 230℃/2.16 kg | ASTM D1238 | 50 | g/10min |
| Shrinkage rate | MD：23℃ MD，23℃ | 内部方法 | 1.5 到 2.0 | % |
| Density density/specific gravity | | ASTM D792 | 0.898 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服，23℃ 屈服，23℃ | ASTM D638 | 30 | Mpa |
| Tensile strain | 断裂，23℃ 断裂，23℃ | ASTM D638 | > 200 | % |
| Bending modulus | 23℃ 23℃ | ASTM D790-A | 1130 | Mpa |
| Rockwell hardness | R 级 R 级，23℃ | ASTM D785 | 95 | |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8 MPa，未退火，6.35 mm 1.8 MPa，未退火，6.35 mm | ASTM D648 | 95 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices