Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD：3.20mm | ASTMD955 | 0.20to0.60 | % |
| Density/specific gravity | | ASTMD792 | 1.20 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strength | 屈服,23°C | ASTMD638 | 47.0 | Mpa |
| Tensile strength | 断裂,23°C | ASTMD638 | 51.0 | Mpa |
| Tensile stress | 断裂,23°C | ISO527-2 | 46.0 | Mpa |
| Tensile stress | 屈服,23°C | ISO527-2 | 47.0 | Mpa |
| Tensile strain | 屈服,23°C | ISO527-2 | 4.0 | % |
| Tensile strain | 断裂,23°C | ISO527-2 | 200 | % |
| Bending stress | 23°C | ISO178 | 65.0 | Mpa |
| Tensile modulus | 23°C | ISO527-2 | 1800 | Mpa |
| elongation | 屈服,23°C | ASTMD638 | 5.0 | % |
| elongation | 断裂,23°C | ASTMD638 | 320 | % |
| Bending modulus | 23°C | ASTMD790 | 2000 | Mpa |
| Bending modulus | 23°C | ISO178 | 1850 | Mpa |
| bending strength | 屈服,23°C | ASTMD790 | 69.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火 | ASTMD648 | 73.0 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 65.0 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dart impact equipped with measuring instruments | -40°C,EnergyatPeakLoad | ASTMD3763 | 48.0 | J |
| Dart impact equipped with measuring instruments | 23°C,EnergyatPeakLoad | ASTMD3763 | 42.0 | J |
| Impact strength of cantilever beam gap | -40°C | ASTMD256 | 40 | J/m |
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 80 | J/m |
| Impact strength of cantilever beam gap | -40°C | ISO180 | 4.8 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO180 | 7.8 | kJ/m² |
| Impact strength of cantilever beam gap | -40°C | ASTMD4218 | NoBreak | |
| Impact strength of cantilever beam gap | 23°C | ASTMD4218 | NoBreak | |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R计秤,23°C | ASTMD785 | 103 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Haze | | ASTMD1003 | 0.30 | % |
| transmissivity | 总计 | ASTMD1003 | 91.0 | % |
| transmissivity | Regular | ASTMD1003 | 89.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices