PETG Eastar™ DS2010 EASTMAN USA

377

Properties:
High transparency
High toughness
Usages:
chip
sporting goods
Certificates:
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	MD：3.20mm	ASTMD955	0.20to0.60	%
Density/specific gravity	23°C	ISO1183	1.19	g/cm³
Density/specific gravity	Density/specific gravity		ASTMD792	1.20	g/cm³

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile stress	断裂,23°C	ISO527-2	49.0	Mpa
Tensile stress	Tensile stress	屈服,23°C	ISO527-2	47.0	Mpa
Tensile strain	断裂,23°C	ISO527-2	210	%
Tensile strain	Tensile strain	屈服,23°C	ISO527-2	4.0	%
Tensile strength	屈服,23°C	ASTMD638	46.0	Mpa
Tensile strength	Tensile strength	断裂,23°C	ASTMD638	53.0	Mpa
Bending stress	23°C	ISO178	64.0	Mpa
elongation	断裂,23°C	ASTMD638	310	%
elongation	elongation	屈服,23°C	ASTMD638	5.0	%
Bending modulus	23°C	ASTMD790	1900	Mpa
Bending modulus	Bending modulus	23°C	ISO178	1750	Mpa
bending strength	屈服,23°C	ASTMD790	67.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45MPa,未退火	ASTMD648	73.0	°C
	Hot deformation temperature	0.45MPa,未退火	ISO75-2/B	73.0	°C
		Hot deformation temperature	1.8MPa,未退火	ASTMD648	65.0	°C
		Hot deformation temperature	Hot deformation temperature	1.8MPa,未退火	ISO75-2/A	66.0	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		ASTMD257	1E+17	ohms
Dielectric constant	23°C,1kHz	ASTMD150	2.60
	Dielectric constant	23°C,10kHz	ASTMD150	2.60
		Dielectric constant	23°C,100kHz	ASTMD150	2.50
		Dielectric constant	Dielectric constant	23°C,1MHz	ASTMD150	2.50
Arc resistance		ASTMD495	123	sec
Volume resistivity	23°C	ASTMD257	1E+17	ohms·cm
Dielectric strength 2	23°C	ASTMD149	17	KV/mm
Dissipation factor	23°C,1kHz	ASTMD150	6E-03
	Dissipation factor	23°C,10kHz	ASTMD150	0.012
		Dissipation factor	23°C,100kHz	ASTMD150	0.015
		Dissipation factor	Dissipation factor	23°C,1MHz	ASTMD150	0.015
Leakage Trace Index		ASTMD3638	700	V

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of cantilever beam gap	-40°C	ASTMD256	60	J/m
	Impact strength of cantilever beam gap	23°C	ASTMD256	370	J/m
		Impact strength of cantilever beam gap	-40°C	ISO180	6.3	kJ/m²
			Impact strength of cantilever beam gap	23°C	ISO180	30	kJ/m²
				Impact strength of cantilever beam gap	-40°C	ASTMD4812	NoBreak
				Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTMD4812	NoBreak
Multi axis Instrumented Impact Energy	-40°C,能量到力量峰值	ISO6603-2	55.0	J
Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy	23°C,能量到力量峰值	ISO6603-2	71.0	J
Dart impact equipped with measuring instruments	-40°C,EnergyatPeakLoad	ASTMD3763	48.0	J
Dart impact equipped with measuring instruments	Dart impact equipped with measuring instruments	23°C,EnergyatPeakLoad	ASTMD3763	45.0	J

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	R计秤,23°C	ASTMD785	105

optical performance	Test Condition	Test Method	Test Result	Unit
transmissivity	总计	ASTMD1003	91.0	%
transmissivity	transmissivity	Regular	ASTMD1003	89.0	%
Haze		ASTMD1003	0.30	%

flammability	Test Condition	Test Method	Test Result	Unit
FlameRating	3.0mm,AT	UL94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PETG Eastar™ DS2010 EASTMAN USA

Technical Data Sheet

You May Like