Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD，23℃ | ISO 294-4 | 0.70 到 0.90 | % |
| Shrinkage rate | MD：23°C | ISO294-4 | 0.70到0.90 | % |
| Melt volume flow rate | 220°C/10.0kg | ISO1133 | 17.0 | cm3/10min |
| Dissolved volume flow rate | 220℃/2.16 kg | ISO 1133 | 17.0 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Bending modulus 2 | 23°C | ISO178 | 2200 | Mpa |
| Bending stress 2 | 23°C | ISO178 | 65.0 | Mpa |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | 8.0 | kJ/m² |
| Tensile stress | 23℃ | ISO 527-2 | 42.0 | Mpa |
| Tensile stress | 23°C | ISO527-2 | 42.0 | Mpa |
| Tensile modulus | 23℃ | ISO 527-2 | 2050 | Mpa |
| Tensile modulus | 23°C | ISO527-2 | 2050 | Mpa |
| Rockwell hardness | 23℃ | ISO 2039-2 | 100 | R 计秤 |
| Bending modulus | 23℃ | ISO 178 | 2200 | Mpa |
| bending strength | 23℃ | ISO 178 | 65.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.80MPa，未退火 | ISO 75-2/Af | 78.0 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/Af | 78.0 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 9E-05 | cm/cm/°C |
| UL flame retardant rating | 1.50mm | UL 94 | HB | |
| Linear expansion coefficient | 流动 | ISO 11359-2 | 0.000090 | cm/cm/℃ |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R计秤,23°C | ISO2039-2 | 100 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.5mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices