Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt mass flow rate | 190°C/2.16kg | ASTMD1238,ISO1133 | 7.8 | g/10min |
| Content of comonomer 3 | | 内部方法 | 6.5 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus -2% secant | | ASTMD638,ISO527-2 | 130 | Mpa |
| Tensile strength | 屈服 | ASTMD638,ISO527-2 | 7.50 | Mpa |
| Tensile strength | 断裂 | ASTMD638,ISO527-2 | 18.0 | Mpa |
| elongation | 断裂 | ASTMD638,ISO527-2 | 590 | % |
| Tensile modulus -2% Secant | | MPa | ASTM D-638 | 130 |
| Tensile modulus -2% Secant | | MPa | ISO 527-2 | 130 |
| Tensile yield strength | | MPa | ASTM D-638 | 7.5 |
| Tensile yield strength | | MPa | ISO 527-2 | 7.5 |
| Tensile fracture strength | | MPa | ASTM D-638 | 18 |
| Tensile fracture strength | | MPa | ISO 527-2 | 18 |
| Tensile strain at break | | % | ASTM D-638 | 590 |
| Tensile strain at break | | % | ISO 527-2 | 590 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| vicat softening point | | ℃ | ISO 306/A | |
| Melting temperature | | ℃ | Internal Method | |
| Vicat softening temperature | | ISO306/A | 90.0 | °C |
| Melting temperature (DSC) | | 内部方法 | 100 | °C |
| film | Test Condition | Test Method | Test Result | Unit |
|---|
| Initial sealing temperature 4 | | 内部方法 | 90.0 | °C |
| Processing performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Temperature | | ℃ | | 260-290 |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Sealing starting temperature | | ℃ | Internal Method | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 190℃/2.16kg | g/10min | ASTM D-1238 | 7.8 |
| Melt index | 190℃/2.16kg | g/10min | ISO 1133 | 7.8 |
| Monomer content | | % | Internal Method | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices