Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Refractive index | N | ISO 489 | 1.49 | |
| Haze | 3mm | ISO 14782 | 0.3 | % |
| Total Light Transmittance | 3mm | ISO 13468-1 | 93 | % |
| Density/specific gravity | | ISO 1183 | 1.19 | g/cm |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| tensile strength | 1A/5 | ISO 527-2 | 78 | Mpa |
| Tensile elasticity | 1A/1 | ISO 527-2 | 3.3 | GPa |
| Flexural strength | | ISO 178 | 127 | Mpa |
| Flexural modulus of elasticity | | ISO 178 | 3.3 | GPa |
| Izod impact strength | 1eA V槽口 | JIS K-7111 | 1.3 | KJ/m |
| Izod impact strength | 1eU 无槽口 | JIS K-7111 | 21 | KJ/m |
| elongation | 1A/5 | ISO 527-2 | 6 | % |
| Rockwell hardness | | ISO 2039 | 101 | M Scale |
| IZOD impact strength | 1A | JIS K-7110 | 1.7 | KJ/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Vicat softening temperature | 50n | ISO 306 | 108 | °C |
| Load deflection temperature | 1.80MPa | ISO 75-2 | 101 | °C |
| Coefficient of linear expansion | | JIS K-7197 | 6×10 | 1/℃ |
| Heat transfer rate | | JIS A-1412 | 0.2 | W/(m·℃) |
| specific heat | | JIS K-7123 | 1.5 | J/(g·℃) |
| Spiral flow | 厚薄2mm,230℃ | 三菱丽阳法 | 130 | mm |
| Spiral flow | 厚薄2mm,250℃ | 三菱丽阳法 | 220 | mm |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | JIS K-6911 | >10 | Ωm |
| dielectric loss tangent | 60Hz | JIS K-6911 | 0.05 | |
| Insulation breakdown strength | 4kV/sec | JIS K-6911 | 20 | MV/m |
| Surface resistivity | | JIS K-6911 | >10 | Ω |
| Dielectric constant | 60Hz | JIS K-6911 | 3.7 | |
| Arc resistance | | JIS K-6911 | 没有痕迹 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24hr | ISO 62 | 0.3 | % |
| Melt index | 230℃,37.3N | ISO 1133 | 2.0 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices