Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 23°C,24hr | ISO62 | 0.040 | % |
| Melt viscosity | 310°C,1000sec^-1 | ISO11443 | 260000 | mPa·s |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Fracture strain | | ISO 527-1,2 | 1.9 | % |
| Tensile stress | | ISO527-2 | 185 | Mpa |
| Tensile strain | 断裂 | ISO527-2 | 1.7 | % |
| tensile strength | | ISO 527-1,2 | 210 | Mpa |
| Bending modulus | | ISO 178 | 13800 | Mpa |
| Bending modulus | | ISO178 | 13200 | Mpa |
| bending strength | | ISO 178 | 280 | Mpa |
| Charpy Notched Impact Strength | | ISO 179/leA | 10 | KJ/m |
| Bending stress | | ISO178 | 260 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear coefficient of thermal expansion | MD | 内部方法 | 1E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD | 内部方法 | 4E-05 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 265 | °C |
| Flame retardancy | | UL 94 | V-0 | |
| Load deformation temperature | 1.8MPa | ISO 75-1,2 | 270 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | IEC60093 | 5E+15 | ohms·cm |
| Dissipation factor | 1kHz | IEC60250 | 1E-03 | |
| Dissipation factor | 1MHz | IEC60250 | 2E-03 | |
| Dielectric strength | 3.00mm | IEC60243-1 | 16 | KV/mm |
| Relative permittivity | 1kHz | IEC60250 | 4.50 | |
| Relative permittivity | 1MHz | IEC60250 | 4.50 | |
| Leakage Trace Index | | IEC60112 | 125 | V |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | | ISO 62 | 0.01 | % |
| Melt viscosity | 310℃、1000sec | ISO 11443 | 260 | Pa.s |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | V-0 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ISO 1183 | 1.66 | g/cm |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| ColourNumber | | | HD9100,HD9001 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices