Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD：3.20mm | ASTMD955 | 0.40to0.70 | % |
| Melt mass flow rate | 220°C/10.0kg | ASTMD1238 | 60 | g/10min |
| Density/specific gravity | | ASTMD792 | 1.19 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Elongation rate 3 | 屈服,3.20mm | ASTMD638 | 5.0 | % |
| Elongation rate 3 | 断裂,3.20mm | ASTMD638 | >20 | % |
| Tensile modulus 2 | 3.20mm | ASTMD638 | 2260 | Mpa |
| Tensile strength 3 | 屈服,3.20mm | ASTMD638 | 44.1 | Mpa |
| Bending modulus 4 | 6.40mm | ASTMD790 | 2550 | Mpa |
| Bending strength 4 | 6.40mm | ASTMD790 | 68.6 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| RTIElec | | UL746 | 85.0 | °C |
| Evolution Calendar intelligent importer | | UL746 | 75.0 | °C |
| RTIStr | | UL746 | 75.0 | °C |
| Hot deformation temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 84.0 | °C |
| Hot deformation temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 76.0 | °C |
| Vicat softening temperature | | ASTMD15255 | 83.0 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | -30°C,3.20mm | ASTMD256 | 69 | J/m |
| Impact strength of cantilever beam gap | -30°C,6.40mm | ASTMD256 | 69 | J/m |
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTMD256 | 250 | J/m |
| Impact strength of cantilever beam gap | 23°C,6.40mm | ASTMD256 | 210 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 105 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.0mm | UL94 | HB | |
| UL flame retardant rating | 1.5mm | UL94 | V-0 | |
| UL flame retardant rating | 2.0mm | UL94 | V-05VB | |
| UL flame retardant rating | 2.5mm | UL94 | V-05VA | |
| UL flame retardant rating | 3.0mm | UL94 | V-05VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices