Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | 横向流量 | ISO 294-4 | 1.0 | % |
| Shrinkage rate | 流量 | ISO 294-4 | 0.60 | % |
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.1 | % |
| density | | ISO 1183 | 1.52 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ISO 527-2 | 7000 | Mpa |
| Tensile stress | 断裂 | ISO 527-2 | 45.0 | Mpa |
| Tensile strain | 断裂 | ISO 527-2 | 1.0 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| thermal conductivity | -- 3 | ASTM E1461 | 2.1 | W/m/K |
| thermal conductivity | -- 4 | ASTM E1461 | 14 | W/m/K |
| RTI Elec | 0.75 mm | UL 746 | 65.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume resistivity | | IEC 60093 | 1.0E+6 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 2.2 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flammability level | 0.75 mm | IEC 60695-11-10, -20 | V-0 | |
| Flammability level | 1.5 mm | IEC 60695-11-10, -20 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices