Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | | ASTM D-785 | 实测 | R |
| Tensile yield strength | | ASTM D-638 | 优等｜≥33 | Mpa |
| Tensile yield strength | | ASTM D-638 | 一等｜≥31 | Mpa |
| Tensile yield strength | | ASTM D-638 | 合格｜≥29 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| vicat softening point | | MA 17018 | 优等｜≥153 | °C |
| vicat softening point | | MA 17018 | 一等｜≥153 | °C |
| vicat softening point | | MA 17018 | 合格｜≥150 | °C |
| Hot deformation temperature | | ASTM D-648 | 优等｜≥86 | °C |
| Hot deformation temperature | | ASTM D-648 | 一等｜≥86 | °C |
| Hot deformation temperature | | ASTM D-648 | 合格｜≥86 | °C |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Isotropy | | MA 15763 | ≥95 | % |
| ash content | 粒料 | MA 16453 | 优等｜≤0.02 | % |
| ash content | 粒料 | MA 16453 | 一等｜≤0.03 | % |
| ash content | 粒料 | MA 16453 | 合格｜≤0.04 | % |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt flow rate | | ASTM D-1238 | 优等｜2.5-3.5 | g/10min |
| Melt flow rate | | ASTM D-1238 | 一等｜2.5-3.5 | g/10min |
| Melt flow rate | | ASTM D-1238 | 合格｜2.0-4.0 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices