Technical Data Sheet
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile yield strength | | | 优级品｜≥8 | Mpa |
| Tensile yield strength | | | 一级品｜≥8 | Mpa |
| Tensile yield strength | | | 合格品｜≥8 | Mpa |
| elongation | 断裂 | | 优级品｜≥500 | % |
| elongation | 断裂 | | 一级品｜≥500 | % |
| elongation | 断裂 | | 合格品｜≥500 | % |
| Tensile fracture strength | | | 优级品｜≥12 | Mpa |
| Tensile fracture strength | | | 一级品｜≥12 | Mpa |
| Tensile fracture strength | | | 合格品｜≥12 | Mpa |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cleanliness | 色粒 | | 优级品｜10 | 个/kg |
| Cleanliness | 色粒 | | 一级品｜15 | 个/kg |
| Cleanliness | 色粒 | | 合格品｜30 | 个/kg |
| Powder ash content | | | 优级品｜≤0.04 | % |
| Powder ash content | | | 一级品｜≤0.04 | % |
| Powder ash content | | | 合格品｜≤0.04 | % |
| Cleanliness | 杂粒 | | 优级品｜10 | 个/kg |
| Cleanliness | 杂粒 | | 一级品｜15 | 个/kg |
| Cleanliness | 杂粒 | | 合格品｜30 | 个/kg |
| Haze | 45℃ | | 优级品｜≤20 | % |
| Haze | 45℃ | | 一级品｜≤20 | % |
| Haze | 45℃ | | 合格品｜≤20 | % |
| Film appearance | | | 优级品｜＋10 | |
| Film appearance | | | 一级品｜－10 | |
| Film appearance | | | 合格品｜－30 | |
| Powder apparent bulk density | | | 优级品｜320-480 | kg/m3 |
| Powder apparent bulk density | | | 一级品｜320-480 | kg/m3 |
| Powder apparent bulk density | | | 合格品｜320-480 | kg/m3 |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Density/specific gravity | 偏差 | | 一级品｜±0.002 | g/10cm3 |
| Density/specific gravity | 偏差 | | 合格品｜±0.003 | g/10cm3 |
| Melt flow rate | 标准 | | 优级品｜2.0 | g/10min |
| Melt flow rate | 标准 | | 一级品｜2.0 | g/10min |
| Melt flow rate | 标准 | | 合格品｜2.0 | g/10min |
| Melt flow rate | 偏差 | | 优级品｜≥±0.3 | g/10min |
| Melt flow rate | 偏差 | | 一级品｜≥±0.3 | g/10min |
| Melt flow rate | 偏差 | | 合格品｜≥±0.4 | g/10min |
| Density/specific gravity | 标准 | | 优级品｜0.92 | g/10cm3 |
| Density/specific gravity | 标准 | | 一级品｜0.92 | g/10cm3 |
| Density/specific gravity | 标准 | | 合格品｜0.92 | g/10cm3 |
| Density/specific gravity | 偏差 | | 优级品｜±0.002 | g/10cm3 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices