Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD:260°C,3.00mm | ISO2577 | 0.50到0.70 | % |
| Water absorption rate | 饱和,23°C | ISO62 | 0.70 | % |
| Water absorption rate | 平衡,23°C,50%RH | ISO62 | 0.20 | % |
| Melt volume flow rate | 260°C/5.0kg | ISO1133 | 18.0 | cm3/10min |
| Shrinkage rate | TD:260°C,3.00mm | ISO2577 | 0.50到0.70 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | 23°C | ISO527-2/1 | 2400 | Mpa |
| Tensile stress | 屈服,23°C | ISO527-2/50 | 54.0 | Mpa |
| Tensile stress | 断裂,23°C | ISO527-2/50 | 47.0 | Mpa |
| Tensile strain | 屈服,23°C | ISO527-2/50 | 4.4 | % |
| Tensile strain | 断裂,23°C | ISO527-2/50 | >50 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| 0.45MPa, unannealed | | ISO75-2/B | 122 | °C |
| 1.8MPa, unannealed | | ISO75-2/A | 102 | °C |
| -- | | ISO306/B50 | 118 | °C |
| -- | | ISO306/B120 | 120 | °C |
| Linear coefficient of thermal expansion | MD:23到55°C | ISO11359-2 | 8E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD:23到55°C | ISO11359-2 | 8.5E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | IEC60093 | 1E+16 | ohms |
| Volume resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Dielectric strength | 23°C,1.00mm | IEC60243-1 | 35 | KV/mm |
| Relative permittivity | 23°C,100Hz | IEC60250 | 3.10 | |
| Relative permittivity | 23°C,1MHz | IEC60250 | 3.00 | |
| Dissipation factor | 23°C,100Hz | IEC60250 | 3E-03 | |
| Dissipation factor | 23°C,1MHz | IEC60250 | 8.5E-03 | |
| Leakage Trace Index | 解决方案A | IEC60112 | 250 | V |
| Filling analysis | Test Condition | Test Method | Test Result | Unit |
|---|
| MeltViscosity2 | 260°C | ISO11443-A | 200 | Pa·s |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Unscented Izod impact strength | -30°C | ISO180 | 无断裂 | |
| Unscented Izod impact strength | 23°C | ISO180 | 无断裂 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.850mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices