Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.56 | |
| Water absorption rate 23 ℃/24h | | ASTM D570/ISO 62 | 0.5 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold shrinkage rate | 3.2mm,flow | ASTM D-792 | DAM｜0.4 | % |
| Mold shrinkage rate | 3.2mm,flow | ASTM D-792 | 50%RH｜- | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| IZOD notch impact strength | | ASTM D-256 | DAM｜100 | J/m |
| IZOD notch impact strength | | ASTM D-256 | 50%RH｜105 | J/m |
| elongation at break | | ASTM D638/ISO 527 | 2.5 | % |
| tensile strength | | ASTM D638/ISO 527 | 169 | kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTN D-638 | DAM｜169 | Mpa |
| tensile strength | | ASTN D-638 | 50%RH｜134 | Mpa |
| elongation | 断裂 | ASTM D-638 | DAM｜2.5 | % |
| elongation | 断裂 | ASTM D-638 | 50%RH｜4 | % |
| Bending modulus | | ASTM D790/ISO 178 | 8960 | kg·cm/cm(J/M)ft·lb/in |
| Bending modulus | | ASTM D-790 | DAM｜8960 | Mpa |
| Bending modulus | | ASTM D-790 | 50%RH｜6900 | Mpa |
| bending strength | | ASTM D790/ISO 178 | 240 | kg·cm/cm(J/M)ft·lb/in |
| bending strength | | ASTM D-790 | DAM｜240 | Mpa |
| bending strength | | ASTM D-790 | 50%RH｜- | Mpa |
| IZOD notch impact strength | | ASTM D256/ISO 179 | 100 | kg·cm/cm(J/M)ft·lb/in |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | | ASTM D648/ISO 75 | 235 | ℃（℉） |
| Hot deformation temperature | | ASTM D648/ISO 75 | 257 | ℃（℉） |
| Hot deformation temperature | 0.45MPa | ASTM D-648 | DAM｜257 | °C |
| Hot deformation temperature | 0.45MPa | ASTM D-648 | 50%RH｜- | °C |
| Hot deformation temperature | 1.80MPa | ASTM D-648 | DAM｜235 | °C |
| Hot deformation temperature | 1.80MPa | ASTM D-648 | 50%RH｜- | °C |
| melting point | | | 262 | ℃（℉） |
| melting point | | ASTM D-3418 | DAM｜262 | °C |
| melting point | | ASTM D-3418 | 50%RH｜- | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | ASTM D257/IEC 60093 | 10 | Ω |
| Surface resistivity | | ASTM D-257 | DAM｜1014 | |
| Surface resistivity | | ASTM D-257 | 50%RH｜1011 | |
| Dielectric constant | 106Hz | ASTM D-150 | DAM｜3.5 | |
| Dielectric constant | 106Hz | ASTM D-150 | 50%RH｜3.8 | |
| Dielectric constant | | ASTM D150/IEC 60250 | 17.2 | |
| Dielectric constant | | ASTM D150/IEC 60250 | 3.6 | |
| Dielectric constant | 103Hz | ASTM D-150 | DAM｜3.6 | |
| Dielectric constant | 103Hz | ASTM D-150 | 50%RH｜5.1 | |
| Volume resistivity | | ASTM D-257 | DAM｜1014 | Ω.m |
| Volume resistivity | | ASTM D-257 | 50%RH｜1011 | Ω.m |
| Volume resistivity | | ASTM D257/IEC 60093 | 10 | Ω.cm |
| Dielectric strength | 3.2mm | ASTM D-149 | DAM｜17.2 | KV/mm |
| Dielectric strength | 3.2mm | ASTM D-149 | 50%RH｜15.6 | KV/mm |
| Loss factor | 103Hz | ASTM D-150 | DAM｜0.009 | |
| Loss factor | 103Hz | ASTM D-150 | 50%RH｜0.113 | |
| Loss factor | 106Hz | ASTM D-150 | DAM｜0.014 | |
| Loss factor | 106Hz | ASTM D-150 | 50%RH｜0.041 | |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 24hr | ASTM D-570 | DAM｜0.5 | % |
| Water absorption rate | 24hr | ASTM D-570 | 50%RH｜- | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices